Item # 1010, Ribbon Screw On James Eagen Sons Co.

Ribbon flight conveyor screws consist of sectional flights, buttwelded together to form a continuous helix. Flights are secured to the pipe by supporting legs. Both ends of the pipe are prepared with internal collars and drilling to accept couplings, drive shafts and end shafts. They are used to convey sticky, gummy, or viscous substances, or where the material tends to adhere to flighting and pipe.

Unit of Measure

Specifications

Material Thickness	N/A 3/16 in.1/4 in.5/16 in.3/8 in.7/16 in.1/2 in.9/16 in.5/8 in.3/4 in.7/8 in.1 in.10 Ga.
Flight Material	N/A 304 Stainless 304L 316L 8620 A-36 A514-GrB(T-1) Aluminum AR400 Corten Mild Carbon Steel
Axle Type	N/A Pipe Solid Tubing
Axle Material	N/A 304 Stainless 304L 316L 8620 A-36 A514-GrB(T-1) Aluminum AR400 Corten Mild Carbon Steel
Welding	N/A Continuous (Both Sides) Continuous (L-Side) Intermittent Tack
Hand	N/A Left Hand Right Hand
Some Industries we Have Worked with Include	N/A Cement Food Processing Chemicals Pharmaceuticals Road Building Equipment Spreaders Waste Processing Dewatering Filter Presses Paddle Conveyor

Specifications

Material Thickness

Flight Material

Axle Type

Axle Material

Welding

Hand

Some Industries we Have Worked with Include